Keramikkondensatoren
| Foto | Herst.-Teilenr. | Verfügbarkeit | Menge | Datenblatt | Serie | Verpackung | Produktstatus | Kapazität | Toleranz | Spannung - Nenn | Temperaturkoeffizient | Betriebstemperatur | Funktionen | Bewertungen | Anwendungen | Ausfallrate | Montageart | Paket/Gehäuse | Größe/Abmessung | Höhe - Sitz (Max) | Dicke (Max) | Leitungsabstand | Leitungsstil |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CM02X5R474M06AH-FLSMD MLCC |
0 |
|
|
- | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LD101A221FAB2A\500LD SERIES |
0 |
|
|
- | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
CM21X6S107M04AT-NKSMD MLCC |
0 |
|
|
- | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
AR215C475K4RAP1SKYCAPS |
0 |
|
|
SkyCap® AR | Tape & Box (TB) | Active | 4.7 µF | ±10% | 50V | X7R | -55°C ~ 125°C | - | AEC-Q200 | Automotive | - | Through Hole | Radial | 0.200" L x 0.125" W (5.08mm x 3.18mm) | 0.300" (7.62mm) | - | 0.200" (5.08mm) | Formed Leads - Kinked |
|
100E121JAR3600XJ32CAP CER 120PF 3.6KV P90 3838 |
0 |
|
|
100E | Tray | Active | 120 pF | ±5% | 3600V (3.6kV) | P90 | -55°C ~ 125°C | High Q, Low Loss, Low ESL, High Voltage | - | RF, Microwave, High Frequency, Bypass, Decoupling | - | Surface Mount, MLCC | 3838 (9797 Metric) | 0.380" L x 0.380" W (9.65mm x 9.65mm) | - | 0.170" (4.32mm) | - | - |
|
AU016D474KAG2AHICV JAPAN - FN |
0 |
|
|
- | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GD5030542MA6NMICRO-W SLC |
0 |
|
|
Ultra Maxi | Tray | Active | 5400 pF | ±20% | 25V | X7R | -55°C ~ 125°C | - | - | General Purpose | - | Surface Mount, SLCC | Nonstandard SMD | 0.050" L x 0.050" W (1.27mm x 1.27mm) | - | 0.007" (0.18mm) | - | - |
|
CM02X5R222K06APSMD MLCC |
0 |
|
|
- | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
CDR35BX154BKWS\500SMP MLC HI-REL |
0 |
|
|
Military, MIL-PRF-55681, CDR35 | Tape & Reel (TR) | Active | 0.15 µF | ±10% | 100V | BX | -55°C ~ 125°C | - | - | General Purpose | S (0.001%) | Surface Mount, MLCC | 1825 (4564 Metric) | 0.177" L x 0.252" W (4.50mm x 6.40mm) | - | 0.059" (1.50mm) | - | - |
|
100E4R7CAW7200XB20CAP CER 4.7PF 7.2KV P90 3838 |
0 |
|
|
100E | Bulk | Active | 4.7 pF | ±0.25pF | 7200V (7.2kV) | P90 | -55°C ~ 125°C | High Q, Low Loss, Low ESL, Non-Magnetic, High Voltage | - | RF, Microwave, High Frequency, Bypass, Decoupling | - | Surface Mount, MLCC | 3838 (9797 Metric) | 0.380" L x 0.380" W (9.65mm x 9.65mm) | - | 0.170" (4.32mm) | - | - |
|
CM21X7T226M06AT-NKSMD MLCC |
0 |
|
|
CM | Tape & Reel (TR) | Active | 22 µF | ±20% | 6.3V | X7T | -55°C ~ 125°C | - | - | General Purpose | - | Surface Mount, MLCC | 0805 (2012 Metric) | 0.079" L x 0.049" W (2.00mm x 1.25mm) | - | 0.057" (1.45mm) | - | - |
|
100E220JAW3600XB20CAP CER 22PF 3.6KV P90 3838 |
0 |
|
|
100E | Bulk | Active | 22 pF | ±5% | 3600V (3.6kV) | P90 | -55°C ~ 125°C | High Q, Low Loss, Low ESL, Non-Magnetic, High Voltage | - | RF, Microwave, High Frequency, Bypass, Decoupling | - | Surface Mount, MLCC | 3838 (9797 Metric) | 0.380" L x 0.380" W (9.65mm x 9.65mm) | - | 0.170" (4.32mm) | - | - |
|
AR30GC472K4RTR1SKYCAPS |
0 |
|
|
SkyCap® AR | Tape & Reel (TR) | Active | 4700 pF | ±10% | 2000V (2kV) | X7R | -55°C ~ 125°C | High Voltage | AEC-Q200 | Automotive | - | Through Hole | Radial | 0.300" L x 0.150" W (7.62mm x 3.81mm) | 0.360" (9.14mm) | - | 0.200" (5.08mm) | Straight |
|
100E681GW3600XJ96CAP CER 680PF 3.6KV P90 3838 |
0 |
|
|
100E | Tray | Active | 680 pF | ±2% | 3600V (3.6kV) | P90 | -55°C ~ 125°C | High Q, Low Loss, Low ESL, High Voltage | - | RF, Microwave, High Frequency, Bypass, Decoupling | - | Surface Mount, MLCC | 3838 (9797 Metric) | 0.380" L x 0.380" W (9.65mm x 9.65mm) | - | 0.170" (4.32mm) | - | - |
|
CM02X6T224M02AP-ILSMD MLCC |
0 |
|
|
- | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
SV03GA271KAATR1GV LEADED SPECIAL |
0 |
|
|
SV | Tape & Reel (TR) | Active | 270 pF | ±10% | 2000V (2kV) | C0G, NP0 | -55°C ~ 125°C | High Voltage | - | General Purpose | - | Through Hole | Radial | 0.370" L x 0.200" W (9.40mm x 5.08mm) | 0.300" (7.62mm) | - | 0.275" (6.99mm) | Straight |
|
KAM15ACG1H681FTAUTO MB CMAP - FN |
0 |
|
|
KAM | Tape & Reel (TR) | Active | 680 pF | ±1% | 50V | C0G, NP0 | -55°C ~ 125°C | - | AEC-Q200 | Automotive | - | Surface Mount, MLCC | 0603 (1608 Metric) | 0.063" L x 0.032" W (1.60mm x 0.81mm) | - | 0.035" (0.90mm) | - | - |
|
100E311GW3600XTCAP CER 310PF 3.6KV P90 3838 |
0 |
|
|
100E | Tape & Reel (TR) | Active | 310 pF | ±2% | 3600V (3.6kV) | P90 | -55°C ~ 125°C | High Q, Low Loss, Low ESL, High Voltage | - | RF, Microwave, High Frequency, Bypass, Decoupling | - | Surface Mount, MLCC | 3838 (9797 Metric) | 0.380" L x 0.380" W (9.65mm x 9.65mm) | - | 0.170" (4.32mm) | - | - |
|
MA305A472KAACKR MOLDED AXIALS |
0 |
|
|
Ceralam® MA | Tape & Reel (TR) | Active | 4700 pF | ±10% | 50V | C0G, NP0 | -55°C ~ 125°C | - | - | General Purpose | - | Through Hole | Axial | 0.130" Dia x 0.240" L (3.30mm x 6.09mm) | - | - | - | Straight |
|
MA101A821FAA-BULKCKR MOLDED AXIALS |
0 |
|
|
Ceralam® MA | Bulk | Active | 820 pF | ±1% | 100V | C0G, NP0 | -55°C ~ 125°C | - | - | General Purpose | - | Through Hole | Axial | 0.090" Dia x 0.160" L (2.29mm x 4.07mm) | - | - | - | Straight |
Kategorieübersicht
Keramikkondensatoren Produkte und Auswahlhilfe
Keramikkondensatoren werden in Industrieautomation, Automobilelektronik, Kommunikationstechnik, Unterhaltungselektronik, erneuerbaren Energien und vielen weiteren elektronischen Systemen eingesetzt. Wir bieten Produkte verschiedener Hersteller, Gehäuseformen und Spezifikationen zur einfachen Auswahl und Beschaffung.
Filtern Sie Keramikkondensatoren nach Hersteller, wichtigen Parametern, Verfügbarkeit und Datasheet. Wenn das gewünschte Modell nicht aufgeführt ist, senden Sie uns eine Anfrage. Wir unterstützen Sie bei Verfügbarkeit, Lieferzeit und möglichen Alternativen.
FAQ
Wie wähle ich den passenden Keramikkondensatoren aus?
Prüfen Sie zuerst elektrische Parameter, Gehäuse, Betriebstemperatur, Einsatzbedingungen und Herstelleranforderungen. Danach können Verfügbarkeit und Lieferzeit verglichen werden.
Kann ich anhand des angezeigten Lagerbestands direkt bestellen?
Bestände können sich ändern. Für Projekt- oder Mengenbedarf empfehlen wir eine Anfrage zur Bestätigung von aktuellem Bestand, Preis und Lieferzeit.
Was kann ich tun, wenn die gewünschte Teilenummer nicht gelistet ist?
Senden Sie uns Teilenummer und benötigte Menge. Wir können schwer verfügbare Teile prüfen und passende Alternativen anhand der Spezifikationen vorschlagen.
Sind Datasheets und technische Unterlagen verfügbar?
Ja. Nutzen Sie die Datasheet-Links in der Produktliste. Falls Unterlagen fehlen, können Sie uns für eine zusätzliche Prüfung kontaktieren.
