Dämpfungsglieder
| Foto | Herst.-Teilenr. | Verfügbarkeit | Menge | Datenblatt | Verpackung/Gehäuse | Serie | Verpackung | Produktstatus | Dämpfungswert | Frequenzbereich | Leistung (Watt) | Impedanz | Klasse | Qualifizierung |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HMC306MS10ERF ATTENUATOR 0.5-15.5DB 10TFSOP |
0 |
|
|
10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | - | Strip | Obsolete | 0.5dB ~ 15.5dB | 700 MHz ~ 3.8 GHz | - | 50 Ohms | - | - |
|
A500N50X4RF ATTENUATOR 50OHM |
0 |
|
|
Nonstandard SMD | - | Bag | Active | - | 0 Hz ~ 1.7 GHz | 500W | 50 Ohms | - | - |
|
|
AT0603T00ECAC7RF ATTENUATOR 0DB 50OHM |
0 |
|
|
- | AT | Tray | Active | 0dB | 0 Hz ~ 20 GHz | 1W | 50 Ohms | - | - |
|
|
AT0603T06ECAC7RF ATTENUATOR 6DB 50OHM 0603 |
0 |
|
|
0603 (1608 Metric) | - | Tray | Active | 6dB | 0 Hz ~ 20 GHz | 1W | 50 Ohms | - | - |
|
|
AT0603T02ECAC7RF ATTENUATOR 2DB 50OHM |
0 |
|
|
- | AT | Tray | Active | 2dB | 0 Hz ~ 20 GHz | 1W | 50 Ohms | - | - |
|
|
AT0603T04ECAC7RF ATTENUATOR 4DB 50OHM |
0 |
|
|
- | AT | Tray | Active | 4dB | 0 Hz ~ 20 GHz | 1W | 50 Ohms | - | - |
|
|
AT0603T05ECAC7RF ATTENUATOR 5DB 50OHM |
0 |
|
|
- | AT | Tray | Active | 5dB | 0 Hz ~ 20 GHz | 1W | 50 Ohms | - | - |
|
HMC305ALP4ETRRF ATTENUATOR 0.5-15.5DB 24VFQFN |
0 |
|
|
24-VFQFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | 0.5dB ~ 15.5dB | 700 MHz ~ 3.8 GHz | - | 50 Ohms | - | - |
|
PXV1220S-1DBN1-T02RF ATTENUATOR 1DB 50OHM 0805 |
0 |
|
|
0805 (2012 Metric) | PxV | Tape & Reel (TR) | Active | 1dB | 0 Hz ~ 3 GHz | 63mW | 50 Ohms | - | - |
|
PXV1220S-1DBN2-T02RF ATTENUATOR 1DB 50OHM 0805 |
0 |
|
|
0805 (2012 Metric) | PxV | Tape & Reel (TR) | Active | 1dB | 0 Hz ~ 3 GHz | 63mW | 50 Ohms | - | - |
|
PXV1220S-7DBN2-T02RF ATTENUATOR 7DB 50OHM 0805 |
0 |
|
|
0805 (2012 Metric) | PxV | Tape & Reel (TR) | Active | 7dB | 0 Hz ~ 3 GHz | 63mW | 50 Ohms | - | - |
|
PXV1220S-7DBN3-T02RF ATTENUATOR 7DB 50OHM 0805 |
0 |
|
|
0805 (2012 Metric) | PxV | Tape & Reel (TR) | Active | 7dB | 0 Hz ~ 3 GHz | 63mW | 50 Ohms | - | - |
|
HMC1095LP4ETRRF ATTENUATOR 31.5DB 75OHM 24QFN |
0 |
|
|
24-VFQFN Exposed Pad | - | Tape & Reel (TR) | Active | 31.5dB | 0 Hz ~ 3 GHz | - | 75 Ohms | - | - |
|
MAX19790ETX+TRF ATTENUATOR 22DB-44DB 36QFN |
0 |
|
|
36-WQFN Exposed Pad | - | Tape & Reel (TR) | Active | 22dB ~ 44dB | 250 MHz ~ 4 GHz | 2.1W | 50 Ohms | - | - |
|
HMC539LP3ETRRF ATTEN 0.25-7.75DB 50OHM 16QFN |
0 |
|
|
16-VFQFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | 0.25dB ~ 7.75dB | 0 Hz ~ 4 GHz | - | 50 Ohms | - | - |
|
HMC542ALP4ERF ATTEN 0.5-31.5DB 50OHM 24VQFN |
0 |
|
|
24-VFQFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | 0.5dB ~ 31.5dB | 0 Hz ~ 4 GHz | - | 50 Ohms | - | - |
|
HMC468LP3RF ATTENUATOR 7DB 50OHM 16VFQFN |
0 |
|
|
16-VFQFN Exposed Pad | - | Bulk | Obsolete | 7dB | 0 Hz ~ 6 GHz | - | 50 Ohms | - | - |
|
SA01B-05FXD ATTN PLUG-JACK BNC 1.25 |
0 |
|
|
BNC In-Line Module | - | Bag | Active | 5dB | 0 Hz ~ 1 GHz | 500mW | 50 Ohms | - | - |
|
SA01B-20FXD ATTN PLUG-JACK BNC 1.25 |
0 |
|
|
BNC In-Line Module | - | Bag | Active | 20dB | 0 Hz ~ 1 GHz | 500mW | 50 Ohms | - | - |
|
|
AT0603T01ECAC7RF ATTENUATOR 1DB 50OHM |
0 |
|
|
- | AT | Tray | Active | 1dB | 0 Hz ~ 20 GHz | 1W | 50 Ohms | - | - |
Kategorieübersicht
Dämpfungsglieder Produkte und Auswahlhilfe
Dämpfungsglieder werden in Industrieautomation, Automobilelektronik, Kommunikationstechnik, Unterhaltungselektronik, erneuerbaren Energien und vielen weiteren elektronischen Systemen eingesetzt. Wir bieten Produkte verschiedener Hersteller, Gehäuseformen und Spezifikationen zur einfachen Auswahl und Beschaffung.
Filtern Sie Dämpfungsglieder nach Hersteller, wichtigen Parametern, Verfügbarkeit und Datasheet. Wenn das gewünschte Modell nicht aufgeführt ist, senden Sie uns eine Anfrage. Wir unterstützen Sie bei Verfügbarkeit, Lieferzeit und möglichen Alternativen.
FAQ
Wie wähle ich den passenden Dämpfungsglieder aus?
Prüfen Sie zuerst elektrische Parameter, Gehäuse, Betriebstemperatur, Einsatzbedingungen und Herstelleranforderungen. Danach können Verfügbarkeit und Lieferzeit verglichen werden.
Kann ich anhand des angezeigten Lagerbestands direkt bestellen?
Bestände können sich ändern. Für Projekt- oder Mengenbedarf empfehlen wir eine Anfrage zur Bestätigung von aktuellem Bestand, Preis und Lieferzeit.
Was kann ich tun, wenn die gewünschte Teilenummer nicht gelistet ist?
Senden Sie uns Teilenummer und benötigte Menge. Wir können schwer verfügbare Teile prüfen und passende Alternativen anhand der Spezifikationen vorschlagen.
Sind Datasheets und technische Unterlagen verfügbar?
Ja. Nutzen Sie die Datasheet-Links in der Produktliste. Falls Unterlagen fehlen, können Sie uns für eine zusätzliche Prüfung kontaktieren.
